The small stuff adds up. A faucet that drips all night, a toilet that runs and quietly wastes gallons, a shower handle that will not shut off — none of it is an emergency, but all of it wastes water, nags at you, and shows up on the bill. These are the jobs a lot of homeowners put off, and the ones we knock out quickly and cleanly.
McKinney fixtures wear out faster than the box promised, and hard water is why. The mineral load in our NTMWD supply builds scale on aerators, cartridges, valve seats, and toilet flappers, so faucets stiffen and drip and fill valves stop sealing. Older homes near downtown may have fixtures long past replacement parts, while new builds in Craig Ranch and Painted Tree sometimes came with builder-grade fixtures that were never meant to last. Either way, most problems are a straightforward repair — and when a fixture is truly done, a clean swap is quick.
We fix what makes sense to fix and replace what does not, we leave the area cleaner than we found it, and we do not upsell you a new fixture when a cartridge will do.
Fixture problems we handle
- A faucet that drips or will not fully shut off
- A toilet that runs constantly or randomly refills
- A toilet that rocks, leaks at the base, or clogs often
- Low or uneven flow from a faucet or showerhead
- A shower or tub valve that will not control temperature
- A garbage disposal that hums, jams, or leaks
- Loose, corroded, or mineral-crusted fixtures
- A new sink, faucet, toilet, or disposal you want installed
How we handle it
- 1
Diagnose the fixture
We find the real cause — a worn cartridge, a bad flapper or fill valve, a cracked seal, or scale buildup — before recommending a repair or a replacement.
- 2
Give you the honest call
For most drips and runs, a repair is quick and affordable. If a fixture is worn out or parts are obsolete, we tell you and price a replacement instead.
- 3
Repair or install cleanly
We fix or swap the fixture, check for leaks, and make sure everything seals, drains, and operates the way it should.
- 4
Test and tidy up
We run the fixture, confirm the leak or drip is gone, and clean up completely — no mess left behind under the sink or on the floor.
Small leaks waste real water
A faucet dripping once per second wastes thousands of gallons a year, and a running toilet can waste far more without you noticing until the bill arrives. These are among the cheapest problems to fix and the easiest to ignore. Handling them promptly saves water and stops a minor drip from swelling into water damage under a cabinet.
Repair or replace a fixture?
Most dripping faucets and running toilets are a fast repair — a new cartridge, flapper, fill valve, or seal. Replacement makes sense when a fixture is old and parts are hard to find, when it is cracked or badly corroded, or when you simply want to upgrade the look or efficiency.
- Worn cartridge or valve seat — repair
- Running toilet from a bad flapper or fill valve — repair
- Cracked toilet tank or bowl — replace
- Obsolete fixture with no available parts — replace
- You want a new style or a low-flow upgrade — replace
Installations done right
Bought a new faucet, toilet, sink, or garbage disposal and want it installed correctly? We handle the supply lines, shutoffs, seals, and drain connections so there are no slow leaks hiding behind the finished look. Clean install, tested before we leave, warrantied in writing.
Why McKinney homeowners choose us for fixture repair
- Most drips and running toilets are a quick cartridge, flapper, or fill-valve fix, and we will not upsell a new fixture when a part will do.
- We know how NTMWD hard water crusts aerators, valve seats, and flappers, so we treat the scale that made the fixture fail, not just the symptom.
- Bring your own faucet, toilet, sink, or disposal and we install it correctly with proper shutoffs and seals, tested for leaks before we go.
- We leave the area cleaner than we found it, with no mess under the sink, and every repair or install is warrantied in writing.
- Upfront pricing from a licensed and insured crew means the smallest fixture job gets the same honest treatment as a big repair.
What affects the price
Fixture work is usually the most affordable plumbing you will pay for; the DFW benchmark below is context, and the fixture and parts set the final price.
- Repair versus full fixture replacement
- The type of fixture (faucet, toilet, disposal, shower valve)
- Whether you supply the fixture or we do
- Parts needed — cartridge, flapper, fill valve, seals
- How accessible the shutoffs and connections are
- Corrosion or hard-water scale that complicates the job
- Multiple fixtures handled in one visit
| Service | Typical DFW range* |
|---|---|
| Minor plumbing repair | $150–$450 |
*Benchmarks are DFW context, not a quote. Your written estimate comes after an on-site diagnosis.